2026 CMZ WS 280 LEFT CONFIGURATION | GL20 (2x10 kg)

Do you want to automate your production process in order to reduce loading and unloading downtime? Thanks to our range of gantry loaders, we offer different possibilities for CNC automation. GL20, GL 100... there is a type of gantry loader for each production process and if there isn't one, we adapt it. In addition, we have designed different workstockers. Programming this type of process is very simple. The software is very intuitive and has been developed so that the user has to input the minimum amount of information, making the cycle work in all cases. Compared to anthropomorphic robots, our gantry loaders are cheaper, more ergonomic, much easier to program and are much faster. Whether you work with billets or shafts, our gantry range can be your best ally. Workstocker for billets, for shafts, special solutions, increased pallet capacity... We are able to find the automation solution that your process needs. Conversational programming system: Our entire range of gantry loaders are easy to program and operate. We have developed a conversational programming system for the robot that allows an agile part change. Programming is very simple since the software minimises the amount of information to be entered by the user, making the cycle work in all cases. With our gantry loaders material loading and component unloading times can be effortlessly slashed, improving the overall performance of the CNC lathe. Prepare your gantry in under 5 minutes 9.6 kg billets: Automation of 9.6 kg billets in a TD 30 YS with GL20II gantry robot (maximum lifting capacity 20kg) and WS-280 workstocker (maximum capacity of Ø280mm). Shafts of Ø38 x 180 mm. and 6.5kg.: Automation of small Ø38 x 180 mm and 6.5 Kg axes in a TA-20-YS with Gantry GL20II robot and 2x Workstockers for shafts, one for blanks and one for finished parts, with 3 rows of parts. Ø57 x 210 mm bolts: Automation of Ø57 x 210 mm bolts in a TA-20-YS with Gantry GL20II stacking the bolts in a WS-280 workstocker which has 14 pallets with 6 independent rods. Screws for aircraft with thread Ø12 x 75 mm: Automation of titanium aircraft screws of Ø12 x 75 mm in a TA-15-S with GL20II gantry loader with a WS-700 workstocker in palletised mode and free fall ramp.